Replacement Handle – 24″ CARTER RECESS Taper Ash T
RCL Product Code – 707A24 When fitting a replacement shaft, the wooden taper may require dressing to suit the tool socket and should be secured with a rivet by a competent person.
Spade, Shovel and Fork
No.4 Open Socket Square Mouth x Hardwood “T” Handle
RCL Product Code – SPEC04ET
Roof Stripping Spade x All Steel MYD
RCL Product Code – RSSSMY
Straight Taper Ash Shaped T Shaft
Straight taper Shaped Ash T replacement shovel or fork handle. Available in lengths from 24″ to 36″ 24″ Straight Taper Shaft Shaped T Ash (Code 770A24) 28″ Straight Taper Shaft Shaped T Ash (Code 770A28) 32″ Straight Taper Shaft Shaped T Ash (Code 770A32) 36″ Straight Taper Shaft Shaped T Ash (Code 770A36) When … Continued
Straight Lipped Ash T Shaft
Straight Lipped Ash T replacement shovel or fork handle. Available in lengths from 22” to 72” When fitting a replacement shaft, the wooden taper may require dressing to suit the tool socket and should be secured with a rivet by a competent person.
Shovel repair rivets
RCL Product Code – 02RIVS Shovel repair rivets. 1.7/8” 4G. Approx 2lb / 900g per bag which equates to a minimum of 70 rivets All repairs should be performed by a competent person.
Straight Taper Ash T Shaft
Straight taper Ash T replacement shovel or fork handle. 24″ Straight Taper Shaft T. Ash (Code 700A24) 26″ Straight Taper Shaft T. Ash (Code 700A26 28″ Straight Taper Shaft T. Ash (Code 700A28) 30″ Straight Taper Shaft T. Ash (Code 700A30) 32″ Straight Taper Shaft T. Ash (Code 700A32) 36″ Straight Taper Shaft T. … Continued
Parallel Ash Poles
1.5″ Diameter and available in various lengths (see below) Blunt and Domed Manufactured from prime European Ash 48″ – 650A48 54″ – 650A54 60″ – 650A60 72″ – 650A72 96″ – 650A96 120″ – 650A10 144″ – 650A12
Shaped 1.3/8’’ Ash Hayfork Handles
Shaped for greater comfort, the shape swells out towards the top of the shaft, acting as a grip.The lightweight and balanced 1.3/8” handles are better suited to Manure and Hayforks. Available in various lengths ‘
Straight Taper
By Dave Clough
A straight taper is the the most popular and versitile taper. This taper will fit most commonly used sockets in shovels, forks and other tools.
Bent Lipped
By Dave Clough
A bent lipped shaft has a dressed and bent taper suitable for use in tools with a forged strap. The lip will enable the shaft to be located deeper within the socket, increasing its strength.
Shunt Pole Taper
By Dave Clough
The shunt pole taper is designed to fit our forged shunt hook.
Straight Taper Edge Tool T Shaft
Straight taper Hardwood T replacement Edging tool handle. When fitting a replacement shaft, the wooden taper may require dressing to suit the tool socket and should be secured with a rivet by a competent person.
Straight Blunt
By Dave Clough
A straight blunt is a plain stem which the user can craft, shape and dress to suit all socket types.
Straight Lipped
By Dave Clough
A straight lipped shaft has a dressed end suitable for use in tools with a forged strap. The lip will enable the shaft to be located deeper within the socket, increasing its strength.